My Garmin Sat Nav
Καλώς ήλθατε στο My Garmin Sat Nav ‼

Πρέπει να συνδεθείτε ή να κάνετε εγγραφή γιά να έχετε πρόσβαση σε όλο το forum

Welcome to My Garmin Sat Nav !!

You must Log in or Register to gain full forum access


fenix® 3 HR Device Firmware

Επισκόπηση προηγούμενης Θ.Ενότητας Επισκόπηση επόμενης Θ.Ενότητας Πήγαινε κάτω

Default fenix® 3 HR Device Firmware

Δημοσίευση από Santosan Την / Το Παρ 6 Μαϊος 2016 - 10:06

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.][Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

fenix 3 HR software version 4.30

as of May 10, 2017

Change History

Changes made from version 4.20 to 4.30:

   Improved the accuracy of step counting while walking fast.
   Fixed an issue, where cadence settings in a workout were cut by half after being transferred to the device.
   Fixed an issue, where the stride length average was not being calculated correctly.
   Fixed a potential issue, where the device could crash if one were to change the dog tracker settings while an asset search was active.
   Fixed a potential issue, where one might see a large descent value when starting a Ski activity.
   Fixed an issue, where step goal updates on the Garmin Connect Mobile App were not syncing with device right away.
   Fixed a potential issue, where the device might lock up when in a XC Ski activity, Row or other paddling activities.


Changes made from version 4.00 to 4.20:

   Added support for Connect IQ SDK 1.4.
   Fixed an issue where the activity summary information being displayed to the user was incorrect, immediately after a sync.

Changes made from version 3.60 to 4.00:

   Added support for Connect IQ SDK 1.3.4.
   Added support for LiveTrack Auto Start. Once enabled on the Garmin Connect Mobile app (More > LiveTrack), the LiveTrack session will be automatically started when the user begins an activity.
   Improved the app settings editing experience.
   Fixed a potential issue where VO2 Max was not being generated for certain users living close to sea level.
   Fixed a potential issue where the users calories could drop to 0 during an activity.
   Fixed a potential issue where users VO2 max and Performance Condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP etc.)
   Fixed a potential issue where the Virtual Partner pace could change during a multisport activity.
   Fixed a potential issue where the track log for an activity was not being shown in Garmin Connect.


Changes made from version 3.50 to 3.60:

   Added support for 'Find My Watch'. (Garmin Connect Mobile App > More > Garmin Devices > Connected Device > Find My Device)
   Added support for VIRB Ultra 30.
   Improved support for the new Garmin Face-It mobile app, enabling creation of a Connect IQ watch face with a photo.
   Improved the warning alert for the last length of a swim workout.
   Improved the usability of the DogTrack widget.
   Improved the Last Swim widget to display pace for open water swim activities.
   Fixed a potential issue where intensity minutes would reset at midnight.
   Fixed an issue where the units on the DogTrack widget were not in sync with the system unit settings.
   Fixed an issue where the sport weekly and monthly total list items were getting highlighted even though they are not selectable.
   Fixed a potential issue with writing developer data through apps that support the Connect IQ 1.3 SDK.


Changes made from version 3.20 to 3.50:

   Added support for Connect IQ 1.3.0 SDK. See the Connect IQ 1.3.0 SDK for a list of new features.
   Added support for Apple Media Service - users can now control any active music player, e.g. Spotify, as well as volume. (requires iOS 8.0 and higher)
   Added support for phone apps to subscribe for more frequent data updates.
   Added support for the dog tracker widget. (Settings > Widgets > DogTrack)
   Added support for broadcasting wrist heart rate data over ANT to other devices during an activity. (Settings > Sensors > Wrist Heart Rate > Broadcast HR > In App)
   Improved wrist heart rate performance. (Requires WHR 2.70)
   Improved the accuracy of pace data for paddle sports.
   Improved how sleep movement could impact intensity minutes calculations.
   Improved the responsiveness of floors climbed data.
   Fixed potential issues with golf scorecards and summary information.
   Fixed an issue with the intensity minutes widget potentially showing dashes for high intensity minute values.
   Fixed a potential issue with access to navigation while running a Connect IQ app.
   Fixed a potential issue with access to app settings while running a Connect IQ app.
   Fixed a potential issue with the backlight failing to turn on when using the LIGHT key.
   Fixed an issue where calorie data was not being recorded correctly on the subsequent activity, after using an HRM-Tri or HRM-Swim.
   Fixed a potential issue with swim workouts.


Changes made from version 3.00 to 3.20:

   Added support for accessing other data screens while in a swim workout rest interval.
   Improved accuracy of distance and lap counting for Pool Swim.
   Improved Auto Lock behavior to avoid locking while in use.
   Improved the reliability of foot pod calibration.
   Improved ETA and ETE estimates when navigating a course.
   Improved label and background consistency across all widgets.
   Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
   Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
   Fixed an issue where distance data fields for SUP were using incorrect precision and units.
   Fixed a potential issue with high battery drain in watch mode.
   Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
   Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
   Fixed a potential display issue with one of the analog watch faces. (Requires Display update 3.50)
   Fixed a potential issue with wrist HR failing to update. (Requires WHR update 2.60)


Changes made from version 2.20 to 3.00:

   Added support for CIQ SDK 1.2.6.
   Added support for Achievements. (Summary of personal records available after an activity is saved, and while still on the saved activity summary page.)
   Added support to turn off activity monitoring Goal Alerts. (Settings > Activity Monitoring > Goal Alert)
   Added support for post activity download of Heart Rate data from HRM-Tri and HRM-Swim sensors. (History > Activity > Download Heart Rate)
   Added support to calibrate altimeter at extreme altitudes.
   Added floors climbed history to the steps widget.
   Added the heading bug to the elevation plot page.
   Added support for saving a waypoint from the Dual Grid page.
   Added support for displaying status of GPS EPO data to the About page. (Settings > System > About > Scroll to the EPO Status Page, Note: downloaded EPO data will not always be stored on the device file system)
   Added support for viewing more than 100 Saved Locations on the device.
   Added support for Walk App (Settings > Apps > Walk).
   Added support for Swimrun App (Settings > Apps > Swimrun).
   Added additional backlight settings: a 4 second timeout and a 5% backlight level.
   Improved distance scrolling on the Project Waypoint page.
   Improved Bluetooth to phone connection reliability. (Requires BLE/ANT FW 3.50)
   Improved auto zoom during waypoint navigation.
   Improved the readability of golf course names on the golf course list page.
   Improved reliability and accuracy of Heart Rate data. (Requires WHR FW 2.30 (10.02.21))
   Improved accuracy of floors climbed data
   Fixed a potential issue where the device could crash when saving a swim activity with HRM Tri data.
   Fixed a potential issue where Intensity Minutes were not being calculated correctly for devices paired with a Heart Rate sensor.
   Fixed an issue where the Auto Scroll setting was not available for paddle sports activity profiles.
   Fixed a potential issue with Timer alarms not working as expected if Do Not Disturb was enabled.



Έχει επεξεργασθεί από τον/την Santosan στις Πεμ 11 Μαϊος 2017 - 20:01, 5 φορές συνολικά


[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
avatar
Santosan
Administrator
Administrator

Άντρας Ηλικία : 47
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10441


Επιστροφή στην κορυφή Πήγαινε κάτω

Default Απ: fenix® 3 HR Device Firmware

Δημοσίευση από Santosan Την / Το Τετ 15 Ιουν 2016 - 11:30

Αναβάθμιση firm στην έκδοση 3.20, έχει ενημερωθεί το πρώτο post.


[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
avatar
Santosan
Administrator
Administrator

Άντρας Ηλικία : 47
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10441


Επιστροφή στην κορυφή Πήγαινε κάτω

Default Απ: fenix® 3 HR Device Firmware

Δημοσίευση από Santosan Την / Το Τετ 10 Αυγ 2016 - 18:54

Αναβάθμιση firm στην έκδοση 3.50, έχει ενημερωθεί το πρώτο post.


[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
avatar
Santosan
Administrator
Administrator

Άντρας Ηλικία : 47
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10441


Επιστροφή στην κορυφή Πήγαινε κάτω

Default Απ: fenix® 3 HR Device Firmware

Δημοσίευση από Santosan Την / Το Σαβ 3 Σεπ 2016 - 10:15

Αναβάθμιση firm στην έκδοση 3.60, έχει ενημερωθεί το πρώτο post.


[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
avatar
Santosan
Administrator
Administrator

Άντρας Ηλικία : 47
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10441


Επιστροφή στην κορυφή Πήγαινε κάτω

Default Απ: fenix® 3 HR Device Firmware

Δημοσίευση από Santosan Την / Το Πεμ 22 Δεκ 2016 - 6:31

Αναβάθμιση firm στην έκδοση 4.20, έχει ενημερωθεί το πρώτο post.


[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
avatar
Santosan
Administrator
Administrator

Άντρας Ηλικία : 47
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10441


Επιστροφή στην κορυφή Πήγαινε κάτω

Default Απ: fenix® 3 HR Device Firmware

Δημοσίευση από Santosan Την / Το Πεμ 11 Μαϊος 2017 - 20:02

Αναβάθμιση firm στην έκδοση 4.30, έχει ενημερωθεί το πρώτο post.


[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
avatar
Santosan
Administrator
Administrator

Άντρας Ηλικία : 47
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10441


Επιστροφή στην κορυφή Πήγαινε κάτω

Επισκόπηση προηγούμενης Θ.Ενότητας Επισκόπηση επόμενης Θ.Ενότητας Επιστροφή στην κορυφή


 
Δικαιώματα σας στην κατηγορία αυτή
Δεν μπορείτε να απαντήσετε στα Θέματα αυτής της Δ.Συζήτησης